fbpx

FREE STANDARD SHIPPING ON ORDERS $99+

Jackson Systems

Comfort System T-32-P Universal 7-Day Programmable Thermostat, 3H/2C

BRAND: Jackson Systems SKU: T-32-P

This product is only available to licensed contractors that are members of our TradesElite program.

*Already a member, login

Comfort System 3H/2C Universal 7-Day Programmable Thermostat

Free Shipping
Ships Next Business Day
Availability:

950 In Stock

Description

Great Thermostat – Great Features – Great Price

The Comfort System™ T-32-P™ universal thermostat is a perfect mix of aesthetics, intuitive operation and performance at an amazingly affordable price. The T-32-P™ is compatible with most residential and commercial HVAC systems and is ideally suited for use with Comfort System™ zoning systems.
The Comfort System™ T-32-P™ is available exclusively from Jackson Systems.

Features:

  • Manual or auto changeover
  • Programmable or non-programmable
  • Equipment compatibility o 1 Heat / 1 Cool
    o 2 Heat / 2 Cool
    o 2 Heat / 1 Cool Heat Pump
    o 3 Heat / 2 Cool Heat Pump
    o 2 Heat / 1 Cool Dual Fuel
    o 3 Heat / 2 Cool Dual Fuel
  • Adjustable setpoint limits
  • Keyboard locks
  • Remote occupancy override
  • Adaptive recovery (optimized start)
  • Smart fan logic for commercial control
  • PIN Protected installer setup menus
  • Outdoor air temperature display
  • 24 volts with non-volatile memory
  • Integrated Modbus Communications
  • 5 year warranty
  • Can be Heat Only
  • Can be Cool Only
  • 3 Speed Fan (Manual or Auto)
  • Indoor Remote Sensor
  • Temperature Averaging 1-2-3 or 4 Sensors
  • After Hours Override 0-12 Hr
  • Single Set Point Stat (2 Programs)
  • Freeze Protection Below 40 degrees Fahrenheit
  • Filter Monitor
  • Short Cycle Protection (4 min. selectable on/off)
  • Sensor Calibration +/- 5 degrees Fahrenheit
  • Adjustable Cycle Rate / Response Time (The lower the number the shorter the cycle)
  • Adjustable Hi Balance Point Point (Gas heat locked out)
  • Adjustable Low Balance Point Point
  • Adjustable Stage Diff. 1.4/1.9/2.4 degrees Fahrenheit
  • Adjustable Purge Time


Specifications:

  • Input Voltage: 24VAC 50/60 Hz +/- 15%
  • Relay Rating: 24VAC @ 1 Amp maximum per relay
  • Operating Temperature: 32 to 122 degrees F
  • Operating RH: 0-95% (non-condensing)
  • Storage Temperature: 32 to 105 degrees F
  • Display Size: 2.75" W X 1.875" H
  • Accuracy: +/- 0.3 degrees @ 77 degrees F
  • Temperature Sensor(s): 10K NTC type 3
  • Stage Delays: Minimum change over time method
  • Timed Upstage: 5 – 90 minutes
  • Short Cycle Protection: Off to 4 minutes
  • Cycle Rate: Unlimited, 30, 10, or 6 (installer set)
  • Display Resolution: 0.1 degree F
  • Control Range: 41 to 122 degrees F or Heat Off / Cool Off
  • Outdoor Temperature Display Range: 17 – 140 degrees F
  • Back Light: Blue EL (Electro Luminescent)
  • Back Light Life: 3,000 hours to half brightness
  • Optimized Start/Stop: Time vs. Temperature Differential – updating(br> Communications Protocol: Modbus
  • Fan Speeds: Difference between setpoint and room temperature
  • Approvals: FCC Part 15 (pending) C-tick
  • Warranty: 5 years

Features and Benefits

  • Up to 3H/2C conventional and heat pump systems
  • 7 day programmable
  • Large backlit display
  • Auto or manual changeover
  • Keypad and/or setpoint lockout
  • Smart fan logic for commercial control
  • Adaptive recovery
  • Optional indoor sensor (T-S1 or T-S2) or outdoor sensor (T-OTS)
  • Outdoor temperature display with use of optional outdoor sensor (T-OTS)
  • Available with integrated Modbus communications (Version 2.20)
  • Hardwired
  • 5-year warranty

Additional information

Stages

3 Heat/2 Cool Heat Pump

Auto Changeover

Warranty

Terminal Designations

, , , ,

Voltage

Changeover

,

Imprinting

Power Type

Programmable

Temperature

Filter Monitor

Vacation Hold

Touchscreen

Display

UPC 840119900378
Imprinting Available Yes